Description
Product Code: K1702
The GroLine HI98118 pH/temperature tester is our latest pocket meter for measuring the pH of a hydroponic nutrient solution. This modern looking meter is only 0.7″ thick and extremely ergonomic, fitting comfortably in your hand. The HI98118 has a very large easy to read LCD display that shows both pH and temperature along with calibration, stability and low battery indicators. All operations are simplified to two buttons. One is for turning the meter on/off and the other for automatic one or two point calibration.
Features at-a-glance
Built in temperature sensor for Automatic Temperature Compensated measurements.
Renewable junction to clear any clogging that causes readings to drift and be erratic .
Stability indicator that disappears once a stable reading is obtained .
Automatic calibration to one or two points at a push of a button.
Uses Hanna’s Quick Cal pH/EC standard with a pH value of 6.86. The standard can also be used to calibrate conductivity meters to 5,000 ŒºS/cm .
Battery % level remaining displayed at start up.
Low battery indicator that is displayed when less than 10% battery life is remaining.
pH Range0.00 to 14.00 pH
pH Resolution0.01 pH; 0.1°C
pH Accuracy±0.1 pH
Accuracy±0.1 pH / ±0.5 °C
pH Calibrationautomatic, at one or two points using standard buffers (pH 4.01, 7.01,10.01); one point calibration using quick calibration solution
Temperature Compensationautomatic from 0 to 50°C (32 to 122°F)
Battery Type/Life1.5V CR2032 (1) / approximately 1000 hours of continuous use
Environment0 to 50°C (32 to 122°F); RH max 100%
Dimensions160 x 40 x 17 mm (6.3 x 1.6 x 0.7“)
Weight75 g (2.6 oz.)
Ordering InformationHI98118 GroLine is supplied with a covered system, HI50036 rapid calibration solution (20 ml) (3), HI700601 detergent solution (20 ml) (1), CR2032 batteries (1), manual istruzioni and quality certificate.
